Q235B Q355B Readymade House Building Fast Installation With Watertight

This product is a modular modern prefabricated house. Its main structure, enclosure system and interior components are produced in the factory with standardized prefabricated parts, which are then transported to the project site for quick splicing and assembly. The biggest feature of the product is fully customizable dimensions; the bay width, depth, floor height and unit layout can be flexibly adjusted according to customer needs, adapting to different regional climates, land conditions and functional requirements. The whole house combines modern architectural aesthetics with practical performance, covering a full range of products from single-story simple houses to multi-story integrated buildings, suitable for rapid construction needs in multiple scenarios.

On-site Installation Operation Steps

1. Site Preparation: Clean the installation site, level the ground (required flatness error ≤5mm), and lay gravel or concrete cushion (depending on usage needs);

2. Module Positioning: Transport the module to the designated position by crane or forklift, place it in the order of numbering, and adjust the level and verticality of the module;

3. Module Splicing: Firmly connect the frames of adjacent modules with bolts, and fill the gaps with sealant for anti-seepage treatment;

4. Pipeline Connection: Connect the water and electricity pipelines between each module, conduct pressure test and power-on commissioning to ensure the pipelines are unblocked and free of faults;

5. Finishing Treatment: Install exterior wall decorative panels and door and window glass, finish the indoor floor and walls, and clean the construction site;

6. Acceptance and Use: Conduct comprehensive acceptance against the installation drawings, and put it into use after passing the acceptance.