| MOQ: | 100m² |
| Price: | $13-35 |
| Standard Packaging: | Customized based on project |
| Delivery Period: | 30-60 Days |
| Payment Method: | T/T,D/A,D/P,L/C |
| Supply Capacity: | 15,000 t / month |
The 32 / 250 mm Profile Sheet (also designated as YX32-250-1000) is a versatile, high-strength single-skin trapezoidal metal cladding sheet widely used for roofing, wall siding, and soffit lining in industrial, commercial, and agricultural buildings. Precision roll-formed with a 32 mm rib depth, 250 mm rib pitch, and 1000 mm effective cover width, it balances clean architectural lines, high water-carrying capacity, and economical material coverage.
Engineered with longitudinal stiffening grooves in the valleys and an anti-capillary overlap rib, the 32/250 profile delivers dependable weather tightness, rapid installation, and long service life across demanding environments.
| Parameter | Standard Specification (32/250 Profile) | Custom / Optional Range & Reference Standards |
|---|---|---|
| Profile Designation | 32/250 mm trapezoidal profile (YX32-250-1000) | 5 crests and 4 pitches per sheet, with valley stiffeners |
| Profile Depth (Rib Height) | 32 ± 1.5 mm | High-rib profile for roofing and cladding |
| Rib Pitch (Crest-to-Crest) | 250 mm | Precision continuous roll-forming |
| Effective Cover Width | 1000 mm | Overall formed width before overlap: approx. 1060–1070 mm |
| Raw Coil Feed Width | 1220 mm / 1250 mm | Standard export coil widths |
| Sheet Length | Cut to length up to 11,800 mm (40′ HQ container limit) | Custom lengths: 1,000–11,800 mm. Longer sheets available for local transport. |
| Base Metal Substrate | PPGI (pre-painted galvanized steel) | Optional: PPGL / Aluzinc (AZ70–AZ150), bare GI/GL, or PPAL (pre-painted aluminum). References: EN 10346 / ASTM A653 / A792. |
| Total Coated Thickness (TCT) | 0.45 mm / 0.50 mm for standard roofing | Full range: 0.30–0.80 mm |
| Steel Yield Strength | G300–G550 (300–550 MPa) | High-tensile structural grades available (ASTM / EN / JIS) |
| Theoretical Weight (Steel) | 0.40 mm: approx. 3.8–3.9 kg/m² 0.50 mm: approx. 4.8–4.9 kg/m² 0.60 mm: approx. 5.8–5.9 kg/m² |
Based on effective cover area. A 0.70 mm steel sheet weighs approx. 6.7–6.9 kg/m². Aluminum weighs approx. one-third as much as steel at the same thickness. |
| Top / Back Coating System | PE (15–25 µm topcoat + 5 µm primer / 5–10 µm back coat) | Optional: SMP, HDP, PVDF, or anti-condensation fleece backing |
| Side-Lap Design | Overlapping rib with anti-capillary groove | Limits capillary water ingress on sloped roofs |
| Recommended Minimum Roof Slope | 5°–10° (approx. 8.7%–17.6%) | The minimum depends on sheet length, end laps, and local rainfall. |
| Typical Purlin Spacing | 1.0–1.5 m | Varies by sheet thickness, steel grade, and local wind load |
| Fixing Method | Self-drilling screws with EPDM sealing washers | Crest fixing for roofing and valley fixing for wall cladding |
| Color Options | RAL 5010 / 5015 (blue), RAL 9002, RAL 7035, RAL 3009 | Custom RAL colors matched to project specifications |
Note: Exact weight per m² varies slightly between 1220 mm and 1250 mm feed coil widths and substrate alloy. Structural load/span charts for specific steel gauges are available on request.
"32 mm" refers to the height (depth) of the trapezoidal rib from valley to crest, and "250 mm" is the center-to-center pitch between adjacent ribs. Four pitches across the sheet yield a clean 1000 mm effective cover width after side overlapping.
PPGI is the most economical choice for standard inland projects. PPGL (Aluzinc) offers significantly higher cut-edge and atmospheric corrosion resistance for humid or industrial zones. PPAL (Aluminum) is ultra-lightweight and excels in high-salinity coastal or marine environments.
For standard industrial roofing with 1.2–1.5 m purlin spacing, 0.45 mm to 0.60 mm high-tensile steel is commonly specified. For wall cladding or interior liner sheets, 0.35 mm to 0.50 mm is typically sufficient depending on local wind loads.
Yes. Many contractors use 32/250 sheets as the exterior weather sheet in a built-up roof/wall system over fiberglass wool or rockwool blankets, or use them alongside matching 50 mm PUR/PIR roof sandwich panels for canopies and non-insulated annexes.