| MOQ: | 100m² |
| Price: | $13-35 |
| Standard Packaging: | Customized based on project |
| Delivery Period: | 30-60 Days |
| Payment Method: | L/C,D/P,D/A,T/T |
| Supply Capacity: | 15,000 t / month |
The 50 mm Roof PUR/PIR Sandwich Panel is a high-performance, self-supporting insulated roofing system engineered for industrial, commercial, and pre-engineered steel buildings (PEB). Featuring a heavy-duty trapezoidal ribbed outer skin bonded to a rigid closed-cell PUR or PIR foam core and a lightly ribbed interior liner, it delivers structural load capacity, leak-proof drainage, and thermal efficiency in a single prefabricated roof deck.
Its 5-rib trapezoidal profile (32 mm rib height at 250 mm pitch) with valley stiffening ribs provides strong resistance against wind uplift, foot traffic during maintenance, and heavy rainfall—making it a dependable roofing envelope across diverse global climates.
| Parameter | Standard Specification (50 mm SKU) | Custom / Optional Range & Reference Standards |
|---|---|---|
| Nominal Core Thickness | 50 mm (measured at valley) | Overall height at rib crest: ~82 mm. Optional core thicknesses: 75 / 100 / 120 / 150 mm. |
| Outer Roof Profile | 5-rib trapezoidal profile (32 mm height × 250 mm pitch) | Valley micro-stiffeners standard. 3-rib and 4-rib profiles available on request. |
| Effective Cover Width | 1000 mm | Standard modular width for rapid purlin alignment. |
| Panel Length | Cut-to-length up to 11,800 mm (40′ HQ container limit) | Standard: 2,000–11,800 mm. Up to 16,000 mm for inland freight. |
| Insulation Core Material | Rigid PUR (polyurethane) or PIR (polyisocyanurate) | CFC/HCFC-free closed-cell foam (≥95% closed-cell content). |
| Core Density | 40 ± 2 kg/m³ | Range: 38–45 kg/m³ (ISO 845 / EN 1602). |
| Thermal Conductivity (λ-value) | PIR: 0.020–0.022 W/(m·K) PUR: 0.022–0.025 W/(m·K) |
Tested per EN 12667 / ASTM C518. |
| Thermal Transmittance (U-value) | PIR: ~0.38–0.44 W/(m²·K) PUR: ~0.45–0.52 W/(m²·K) |
Calculated per EN 14509, including insulation volume in the trapezoidal ribs. |
| Metal Facing Substrate | PPGI (pre-painted galvanized steel) | Optional: PPGL (Aluzinc AZ70–AZ150) or PPAL (pre-painted aluminum). References: EN 10346 / ASTM A653 / A792. |
| Facing Thickness (Ext. / Int.) | 0.50 mm external / 0.40–0.50 mm internal | Custom range: 0.40–0.70 mm. |
| Surface Coating System | Polyester (PE, 25 µm) | Optional: SMP, HDP, or PVDF for high-UV exposure and coastal corrosion protection. |
| Side Joint & Waterproofing | Overlapping trapezoidal crown joint | Optional factory foam cut-back for end laps on long, continuous roof slopes. |
| Recommended Minimum Roof Slope | ≥5% without end laps / ≥7% with end laps | Adjustable based on local rainfall intensity and project engineering. |
| Approximate Panel Weight | ~10.5–11.5 kg/m² (0.50 / 0.50 mm steel) | ~9.5–10.3 kg/m² with a 0.40 mm inner liner. |
| Reaction to Fire | PIR: Euroclass B-s1,d0 / B-s2,d0 or ASTM E84 Class A PUR: Euroclass B-s3,d0 / DIN 4102 B2 |
Project-specific third-party fire test reports available upon request. |
| Acoustic Insulation (Rw) | ~25–29 dB | Reduces rain-impact noise compared with single-skin metal sheets. |
| Color Options | RAL 5010 / 5015 (blue), RAL 9002, RAL 7035 | Custom RAL exterior colors with a light-reflective white interior liner. |
Note: Exact allowable purlin spacing and structural load tables depend on steel gauge, yield strength, and local wind/snow loads. Project-specific span tables are available upon inquiry.
In roof sandwich panels, the nominal thickness (50 mm) is measured across the flat insulation valley between ribs. Adding the 32 mm trapezoidal outer rib height gives a total height of approximately 82 mm at the crest, providing both higher load-bearing stiffness and slightly better average thermal performance.
For roof slopes longer than 11.8 m, panels are manufactured with a factory-trimmed foam cut-back (typically 150–250 mm) on the upper sheet’s overlapping end, allowing the outer metal skin to lap cleanly over the lower panel with butyl sealant tape and EPDM-washer fasteners.
For coastal zones within a few kilometers of saltwater or chemically corrosive factories, we recommend PPGL (Aluzinc) or PPAL (Pre-Painted Aluminum) paired with HDP or PVDF coating rather than standard PE-coated PPGI.
Yes. Translucent FRP or polycarbonate daylight sheets profiled to match the exact 32/250 trapezoidal rib geometry, along with custom-bent ridge and eave flashings, can be supplied in the same container.