Products
PRODUCTS DETAILS
Home > Products >
Q235B Q355B UPN UPE Steel Channel and C Channel Supplier with Cut To Length Service

Q235B Q355B UPN UPE Steel Channel and C Channel Supplier with Cut To Length Service

MOQ: 1 PCS/20 Tons
Price: $1300-3000
Standard Packaging: Customized based on project
Delivery Period: 30-60 Days
Payment Method: D/A,L/C,D/P,T/T
Supply Capacity: 15,000 t / month
Detail Information
Place of Origin
Chengdu , China
Brand Name
Sichuan Shunyao Supply Chain Management Co., Ltd.
Certification
CE,ISO
Wind Resistance:
200 Km/h
Frame Type:
Portal Frame
Designstandard:
AISC / Eurocode / GB
Corrosion Resistance:
High
Tensile Strength:
Strict Control
Height Range:
Up To 30m
Installationmethod:
Bolt-connected Assembly
Customization:
Customizable Dimensions And Layouts
Span Range:
Up To 30 Meters Without Internal Columns
Thickness Of Panel:
50mm, 75mm, 100mm, 150mm, 200mm, 250mm
Designflexibility:
Customizable Dimensions And Layout
Roof And Wall:
Steel Sheet Or Sandwich Panel
Using Life:
50 Years
Frame:
Portal Frame
Thickness Options:
50mm, 75mm, 100mm, 150mm, 200mm, 250mm
Highlight:

Q235B Steel Channel

,

UPN Steel Channel

,

Q235B Q355B UPN UPE Steel Channel

Product Description
Steel Channels: UPN, UPE and C Channel from Stock or Cut to Length

UPN / UPE / C channel · Q235B / Q355B · 6–12 m or cut to length · EN 10204 3.1 certificate

A steel channel is a single-symmetric section: the shear centre sits outside the web, so it twists before it bends if the load is not applied through that point. That one property explains most of the practical rules around channels — why they are braced in pairs, why they are loaded through the web, and why a channel used as a beam usually needs restraint that an H-beam does not.

Three Families, Three Designations

The same 100 mm steel channel is written three different ways depending on the standard, and the shapes are not identical.

  • GB (China). Written by height: 10#, 12#, 16#, 20A, 20B. The number is the web height in centimetres — 10# is 100 mm. The A and B suffixes are different wall thicknesses for the same height.
  • EN (Europe). UPN 100 has a tapered inner flange face, like the older I-beams. UPE 100 has parallel flanges, which makes it easier to bolt to. Specify which one — they are not interchangeable at a connection.
  • ASTM (US). C10×30 is 10 inches deep and weighs 30 lb/ft. As with W-shapes, the second number is the weight, not the flange width.

If the drawing says “100 channel” and nothing else, ask which family. The weight per metre differs, and on a purlin run that difference is the whole quotation.

Tapered or Parallel Flange Matters at the Connection

UPN and most Chinese channels have a tapered inner face. A bolted connection needs a tapered washer, or the bolt bears on an edge and works loose.

UPE and cold-formed C sections have parallel faces and take a plain washer. If a fabricator is expecting one and receives the other, the connection detail has to be reworked on site — which is why the standard belongs on the purchase order, not just the size.

Stock, Cut to Length, or Rolled to Order
Steel channel sections stacked in a warehouse, showing UPN, UPE and C channel profiles ready for stock or cut-to-length supply

A steel channel follows the same three routes as any section, and the same question to settle first: what is actually on the floor.

Standard sizes from stock are the fastest and the cheapest per tonne. Cut to length removes a saw operation from your shop, and the cutting plan shows the waste before you commit. A size outside the stock list, or a low-temperature grade, goes to the mill at a minimum tonnage.

Where Channels Earn Their Place
  • Purlins and girts — where a flat face for the cladding fixing matters more than bending efficiency.
  • Mezzanine beams and joists — a channel pairs well with a timber or deck floor, because the top flange is a flat seat.
  • Equipment supports and frames — the flat web takes a bolted bracket without a welded plate.
  • Trailer and chassis work — where the section is bolted through the web, not loaded through the shear centre.
  • Columns in light structures — usually in pairs back-to-back, which restores the symmetry the single channel lacks.
What to Check on a Channel

Three things beyond the nominal size, and they are the ones that cause site problems.

  • Twist. A channel twists more readily than an H-section during handling and welding. Check it before it goes into a welded assembly, not after.
  • Web squareness and flange flatness, because both affect how a cladding sheet or a floor deck sits.
  • Hole positions, if the channel is drilled. A channel drilled from the wrong datum cannot be flipped to fix it — it is handed.
What We Need to Quote
Item Details Required
Designation and standard 10#–40#, UPN / UPE, or C10×30
Grade Q235B, Q355B, S235JR, S355JR, A36
Quantity and lengths Quantity in tonnes, and the length list
Route Stock, cut to length, or mill order
Drilling If the channel is not plain
Surface Mill finish, blasted and primed, or galvanized
Certificate and inspection EN 10204 3.1 and any third-party inspection

Send the list and we return the weights, the cutting plan and a quotation.

Frequently Asked Questions
What does 10# mean on a Chinese channel?

The web height in centimetres: 10# is 100 mm deep. The A and B suffix denotes two wall thicknesses at the same height.

What is the difference between UPN and UPE?

UPN has a tapered inner flange face and needs tapered washers at bolted connections. UPE has parallel flanges and takes plain washers. They are not interchangeable at a connection detail.

Why does a channel twist?

Because it is single-symmetric: the shear centre lies outside the web, so an eccentric load produces torsion. Channels used as beams are usually restrained, paired back-to-back, or loaded through the web.

Can you cut steel channel to length?

Yes, on a band saw or plasma line, to an agreed tolerance, with a cutting plan that shows the waste.

Do you supply galvanized channel?

Yes, hot-dip galvanized, with the coating thickness specified for the exposure. Vent and drain holes are added at fabrication for hollow assemblies.

What certificate comes with it?

EN 10204 3.1, tied to the heat number and the bundle. Third-party inspection can be arranged.

What is the minimum order?

Three tonnes for stock sizes; mill orders carry the mill minimum for the size and grade.

Send the designation, the grade and the length list. We return the weights, the cutting plan and a quotation.