Steel Workshop Building with Turnkey Contract Fire-resistant Materials and Crane Beam System

A turnkey steel structure workshop project: we design it, fabricate it, ship it and erect it. You provide the site and the civil works; we hand over a finished building. This page sets out what is in scope, what is not, and what we need from you to quote.

In a turnkey contract, one party is responsible for the whole job. On a steel workshop that covers:

• Design and structural drawings
• Steel fabrication and surface treatment
• Roof and wall cladding, doors, windows and accessories
• Container loading and shipping
• Erection on site, by our crew or with our supervision

What is not included: land, foundation civil works, site utilities, permits and local labour accommodation. We say this plainly at quotation stage. Unclear scope is what turns an overseas steel project into a dispute.

Design is free, and it comes with the drawings a builder actually needs: plan, elevations, sections, foundation drawing and installation drawings.

If the project needs calculations stamped by an engineer registered in your country, we work with your engineer and supply the inputs and the section properties they need. Better to divide that task honestly than to promise a stamp we cannot provide.

Main frame: welded H-section steel or steel truss.

Steel grades, by standard: Q235, Q355, A36, A572 Grade 50, A992, S235JR, S355JR, S460NL.

Secondary frame: purlins (C / Z), angle braces, tie rods, vertical and horizontal bracing.

Roof and wall: EPS, glass fibre, rock wool or PU sandwich panel, or corrugated steel sheet.

Accessories: aluminum, PVC or sandwich panel windows; sliding, rolling or personnel doors; galvanized gutter with PVC downpipe; anchor bolts, high-strength bolts, screws, sealant, fans and skylight panels.

Beyond the main frame, a workshop project usually needs a spread of sections. We supply:

• European I-beams: IPE and IPN series, for example IPN 340
• European H sections: HEA, HEB, HEM
• Channels: UPN, UPE

Sections come cut to length, and we quote weights per metre so freight and customs figures can be checked before the order goes out -- not discovered when the bill lands.

Frames go on steel pallets inside containers; panels are film-wrapped; fixings, plates and bolts are boxed and listed. Loading plans are prepared for the project, not for individual containers, so the order of arrival matches the order of erection on site.

Where the client wants it, we send an erection team, and we have built steel structures outside China. Where the client prefers a local contractor, we supply the drawings, an assembly sequence and technical supervision on site.

Either way one thing does not change: the frame has to go up the way it was designed, and our engineer stays accountable for that.

Lead time is 30 days from deposit, subject to quantity and panel types. Erection follows the site programme. A single-storey workshop goes up in weeks, not months, once the foundation is ready and the containers are on site.

1. Site -- country, city, and conditions (coastal, seismic, snow)
2. Building use and size -- length * width * eave height, and storeys
3. Loads -- wind, snow and seismic; crane tonnage if there is one
4. Steel standard and grade
5. Scope -- supply only, or supply and erect
6. Roof and wall -- panel type and thickness
7. Doors, windows, ventilation and skylights
8. Programme -- when you need it on site

Send the eight points and you get a scope note, drawings and a price.