Products
PRODUCTS DETAILS
Home > Products >
Q355B Portal Frame Steel Structure Warehouse with Tapered H-Beam Haunch Design for Up to 60m Clear Span Storage Buildings

Q355B Portal Frame Steel Structure Warehouse with Tapered H-Beam Haunch Design for Up to 60m Clear Span Storage Buildings

MOQ: 1 PCS/20 Tons
Price: $1300-3000
Standard Packaging: Sea-worthy bundles; main frames and crane beams in 40 ft open-top
Delivery Period: 30-60 Days
Payment Method: L/C,D/A,D/P,T/T
Supply Capacity: 15,000 t / month
Detail Information
Place of Origin
Chengdu , China
Brand Name
Sichuan Shunyao Supply Chain Management Co., Ltd.
Certification
CE,ISO
Corrosion Resistance:
Depends On Coating
Thermalinsulation:
Optional Insulation Panels Available
Eave Height:
3m To 12m, Customizable
Spanwidth:
Up To 60 Meters
Spanrange:
5m To 30m
Designstandard:
AISC / Eurocode / GB
Max Wind Resistance:
250 Km/h
Corrosionprotection:
Galvanized Steel With Anti-rust Coating
Frametype:
Cold-formed Steel / Hot-rolled Steel
Load Bearing Capacity:
High
Installationtime:
Quick Assembly With Prefabricated Parts
Material:
High-strength Steel
Transportation:
Containerized
Windresistance:
Up To 120 Km/h
Keyword:
Building Steel Structure
Highlight:

Q355B Portal Frame Steel Structure

,

Tapered H-Beam Steel Structure Warehouse

,

60m Clear Span Steel Structure Warehouse

Product Description

Portal Frame Steel Structure — Tapered Haunch Design for Storage Warehouses

Tapered Q355B rafters · Pinned or fixed bases · 6–9 m bay spacing · CE & EN 1090-1

A portal frame steel structure is defined by rigid knee joints at the eaves and light pinned bases at the foundation — not by a generic warehouse label. When a listing quotes bait per-square-metre figures and pastes a three-storey box-column factory into the spec sheet, both the engineering and the budget break down before tender.

Matching Steel Depth to the Bending Moment Envelope

In a single-storey storage span from 15 m to 40 m, bending moment is never uniform along a rafter or column. Moment peaks sharply at the eave knee connection, stays moderate at the apex, and drops toward zero at a pinned column base.

Fabricating the full bay from uniform rolled beams wastes steel where stress is low. A purpose-engineered portal frame steel structure uses welded tapered H-sections with deep eave haunches — typically running 10% of the span at 1.5 to 2 times rafter depth — bolted through extended end-plates with Grade 10.9S high-strength bolts. Matching web depth to the bending envelope cuts primary frame tonnage by 15–25% compared with straight sections, matching the welded H-beam approach on our customized steel warehouse page.

Pinned vs. Fixed Column Bases: The Hidden Foundation Cost Lever

Many buyers compare steel frames by tonnage while ignoring concrete under the anchor bolts. Base fixity is the single largest civil cost lever on a portal frame steel structure:

  • Pinned column bases (standard for storage). Two to four anchor bolts centered near the column web transfer vertical load and horizontal shear — not bending moment — into the pad footing. On normal or soft soils, pinned bases cut concrete and rebar volume by 25–40% compared with fixed footings.
  • Fixed column bases (crane or strict-drift bays). Heavy stiffened baseplates and wide anchor-bolt patterns carry bending into the concrete to limit lateral sway. Fixed bases pay off for overhead bridge cranes, tall narrow bays or high seismic zones — not ordinary dry storage.
Why a Portal Frame Fails Sideways Without Fly Bracing

A bare portal frame is stiff in its own plane and fragile sideways. Under high wind uplift, the rafter bottom flange switches into compression and buckles laterally long before Q355B reaches yield strength.

Complete portal frame steel structure supply requires four secondary stability systems that cut-rate listings omit:

  • Fly braces (knee stays). Angle stays bolted from the rafter or column compression flange back to Z- or C-section purlins every 2.5–3.5 m to stop lateral-torsional buckling.
  • Roof X-bracing and wall bracing bays. Tension rods or angle cross-bracing in the end bays transfer longitudinal gable wind down to the foundations.
  • Rigid eave struts and tie beams. Continuous struts link intermediate bents back to the braced bays so the building acts as one diaphragm.
  • Lapped Z-purlins and sag rods. Sleeved Z-purlins create continuous beam action across bays, holding roof deflection within sheet tolerances.
Portal Frame vs. Multi-Storey Box-Column Frames

Portal frames excel at single-storey clear spans from 15 m to 40 m for dry storage, logistics cross-docking and agricultural halls (for 40 m clear aisle layouts, see our column free warehouse guide).

Once a plant adds full second or third production floors with heavy slab live loads, a single-storey light portal frame is the wrong system. Multi-storey plants require braced or moment-resisting box-column frames and composite floor decks, covered on our multi-storey steel office building page. Pasting a three-storey box-column factory inside a portal-frame quotation signals an unedited template rather than a calculated frame.

Five Inputs That Govern Real Portal Frame Tonnage and Budget

Ultra-low marketplace listings often exclude bracing, high-strength bolts, surface blasting and real wind loads — leaving buyers with an incomplete shell that fails local building approval.

Actual supply cost for a portal frame steel structure follows five engineering inputs:

  1. Clear span and eave height. Primary steel weight commonly runs 22–38 kg/m² at 6–9 m bay spacing, rising sharply above 30 m span or 10 m eave height.
  2. Local wind speed, snow load and seismic zone. Coastal typhoon wind (45–55 m/s) or heavy snow drives rafter depth, purlin thickness and fastener spacing far more than floor area.
  3. Cladding and fire performance. Single corrugated sheet (0.45–0.6 mm) versus 50–100 mm PU, PIR or Class A rockwool sandwich panels sets both envelope budget and roof dead load.
  4. Surface protection. Shot blasting to Sa 2.5 with epoxy zinc-rich primer (75 µm DFT) or hot-dip galvanizing for coastal sites versus basic shop primer.
  5. Design code. Engineering to GB 50017, Eurocode 3 (EN 1993), AISC 360 / ASCE 7 or AS 4100 governs member slenderness and sway limits.
Scope Boundary and What We Need to Quote

We fabricate the Q355B/Q235B portal frame steel structure, tapered rafters and columns, haunched end-plates, Z/C purlins, bracing, Grade 10.9S bolts, anchor bolts, cladding and erection drawings. Civil foundations, floor slabs, MEP utilities and local erection labour stay with the local contractor unless agreed separately. For broader warehouse selection, see our steel structure warehouse hub.

Send these details for a calculated take-off and quotation:

  • Length, clear span, eave height and target bay spacing (6–9 m)
  • Project city or design loads: basic wind speed, snow load, roof live load and seismic zone
  • Cladding choice: single sheet or PU / PIR / rockwool sandwich panel thickness
  • Doors, skylights, ridge vents, canopies or mezzanine areas
  • Governing code (EN 1993, AISC/ASCE 7, AS 4100 or GB 50017) and destination port
Frequently Asked Questions
What is the economical span and bay spacing for a portal frame steel structure?

Single-span portal frames work most economically between 15 m and 36 m clear width with 6–7.5 m bay spacing (up to 9 m for large logistics hubs). Beyond 40 m without interior columns, steel weight climbs sharply and a roof truss often becomes more efficient.

Why do portal frames use tapered rafters and eave haunches?

Bending moment peaks at the eave knee joint and drops toward the column base and mid-span. Tapered webs and bolted eave haunches concentrate steel where stress is highest, trimming primary frame weight by 15–25% versus uniform rolled H-beams.

Should a storage warehouse use pinned or fixed column bases?

Storage warehouses without heavy overhead cranes almost always use pinned bases. Pinned bases avoid transferring bending moment into the footing, cutting concrete foundation volume by 25–40% compared with fixed bases while simplifying anchor-bolt alignment.

Can I buy a 20 m² sample of a portal frame steel structure?

No structural portal frame can be tested as a 20 m² sample because span, haunch stiffness and bracing only function at full building scale. We verify quality before dispatch via EN 10204 3.1 mill test certificates, Tekla 3D models, weld inspection reports and third-party SGS/BV audits.

What steel grade replaced Q345B on Chinese-fabricated portal frames?

China's GB/T 1591-2018 standard replaced Q345B with Q355B (355 MPa minimum yield strength), closely equivalent to European EN 10025 S355JR and ASTM A572 Gr.50. Primary frames are fabricated in Q355B or project-specified international grades.

How are portal frame steel members packed for ocean freight?

Tapered rafters and columns under 11.8 m load into 40 ft open-top or high-cube containers on steel pallets with timber blocking to protect coatings. Purlins, bracing, Grade 10.9S bolts and flashing ship in labelled crates matched one-to-one with erection drawings.

What do you need to quote a portal frame steel structure accurately?

Share your building footprint (length, span, eave height), project city or wind/snow loads, cladding spec, governing design code and destination port. Our engineers calculate member sizing and return a complete steel take-off and quotation.